产品展示
日本思达（CEDAR)电批扭力测试仪
点击次数：371发布时间：2009/11/2 0:00:00
更新日期：2012/1/12 14:21:47
所 在 地：日本
产品型号：DI-9M-8
相关标签：电批扭力测试仪
优质供应
详细内容
| Management of electrik screw driver |
| 仠Torque Meter 丂DI-9M-8/08 |
| DI-9 series is most suitable for checkingcontrolling the torque of Electric ScrewdriverTorque Driver. |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
 |
丂 丂 |
| The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P). |
| Specification | DI-9M-8 | DI-9M-08 | |
| Measuring range | 0.020-8 N | 2.0-800 mN | |
| 0.20乣80 kgf丒cm | 0.020乣8 kgf丒cm | ||
| 0.20乣70 lbf丒in | 0.020乣7 lbf丒in | ||
| Accuracy | 亇0.5% (499 digit or less 亇3digit) | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW (rightleft) | ||
| Zero return by one touch | Return to zero by pressing clear button. | ||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | ||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | ||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | ||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | ||
| Data Output | ASCII format (baud rate 19200) | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Power supply | Ni-Cd chargeable battery 1.2V 亊 5cells 700mAh | ||
| Charging time | About 3hours | ||
| Continuous working time | About 12hours | ||
| clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | ||
| Socket size | 仩 20mm/ 仩9.5mm | ||
| Dimension / Weight | W:160亊D:125亊H:55 / About 1kg | ||
| Recommend buffer accessories | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
| Cube (with a 5th page screw hole)丂20x20x20 丂(M2.6/M3/M4/M5/M6 Tap processing) | |||
| AC/DC adaptor | |||
| Exclusive receipt case | |||
| An inspection report, a proofreading certificate, a traceability system figure | |||
仸Do not use for measurement of impact tool.Do not apply more than the specified torque.
| 仠 MEASURING JOINT OW series | |
 | Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, work efficiency improved. |
| Specification | Type | ||||
| OW-025 | OW-10 | OW-20 | OW-60 | ||
| Measuring range N | 0.25 | 1 | 2 | 6 | |
| Mechanical life 乮times乯 | 10,000 | 8,000 | 5,000 | 5,000 | |
| Outer diameter size 乮mm乯 | Bit engagement part (screw part) | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
| The standard screw is cross recess screw but they may be altered as necessary | |||||
| Outside diameter | 冇28 | 冇32 | 冇32 | 冇38 | |
| Height | 44 | 51 | 51 | 69 | |
| 俬nstallation | 20square 亊4(t) | ||||
