产品展示
日本思达电批扭力测试工具
点击次数：554发布时间：2009/11/2 0:00:00
更新日期：2012/1/12 14:21:33
所 在 地：日本
产品型号：CD-10M
相关标签：电批扭力测试仪
优质供应
详细内容
| Management of electric screw driver |
| 仠Torque Meter 丂CD-100M/10M |
 |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
| Specification | CD亅100M | CD亅10M | ||
| Measuring range (at the time of Track) | 0.10乣10丂N丒m | 1.0乣100丂們N丒m丂 | ||
| 1.0乣100 kgf丒cm | 0.10乣10 kgf丒cm | |||
| 1.0乣90 lbf丒in | 0.10乣9 lbf丒in | |||
| Accuracy | 亇0.5亾乮F/S乯(199 or less digit亇1digit) | |||
| Display | The 3.5 figures digital display of LCD | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | |||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | |||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | |||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch zero | A clear button is pushedit is a zero.丂 Data is outputed. | |||
| Data output | ASCII format (baud rate 19200) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | About 3 hours | |||
| Continunous working time | About 12 hours | |||
| Socket fit mouth | 仩 20mm/ 仩9.5mm | |||
| Weight | Abbreviation 1 kg | |||
| Outside dimension | 160乮W乯亊125乮D乯亊55乮H乯 | |||
| Attachment | Measurement joint丂SJ50/SJ10K | Measurement joint丂SJ10 | ||
| Accessories (one piece each) | AC/DC adaptor | |||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| SJ50 | SJ10 | About an adapter 亙measurement joint丂SJ乮PAT.P乯亜 |
 |  | It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort. |
