武汉江诗丹顿维修点/Vacheron-Constantin(中国)售后维修中心名表维修连锁电话：400-875-1181/400-677-0155全国百家连锁维修领导品牌，武汉江诗丹顿维修点/Vacheron-Constantin(中国)售后维修中心 服务地区：北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区，形成了庞大的腕表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务，武汉江诗丹顿维修点/Vacheron-Constantin(中国)售后维修中心 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠，武汉江诗丹顿维修点/Vacheron-Constantin(中国)售后维修中心 到店修表立等可取，流程透明，价格公开。

---

---

　　华东地区维修服务热线：4006807911

　　济南(山东店)：济南市历下区泉城路180号齐鲁大厦B座10层1005室

　　南京(江苏店)：南京市秦淮区汉中路1号南京金融中心10楼H室

　　合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

　　杭州(杭州店)：杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

　　上海(上海店)：上海市黄浦区南京东路409-459号上海置地广场9楼918室

　　华南地区维修服务热线：4008092655

　　广州(广州店)：广州市天河区体育西路103号维多利广场写字楼A座2605室

　　深圳(深圳店)：深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

　　南宁(广西店)：南宁市青秀区金湖北路59号地王大厦12楼

　　华中地区维修服务热线：4006807911

　　武汉(湖北店)：武汉市汉江区中山大道818号平安大厦22层11室

　　郑州(河南店)：郑州市金水区花园路39号国贸中心招银大厦14层1406室

　　南昌(江西店)：南昌市东湖区胜利路步行街32号裕泰福珠宝二层

　　华北地区维修服务热线：4008092655

　　北京(北京店)：北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

　　天津(天津店)：天津市和平区南京路219号天津中心写字楼9楼903室

　　太原(山西店)：山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

　　西南地区维修服务热线：4008751181

　　成都(四川店)：成都市锦江区东御街18号天府广场百扬大厦21层2107室

　　东北地区维修服务热线：4006770155

　　沈阳(辽宁店)：沈阳市和平区中华路69-1号富丽华商务中心9楼903室

　　哈尔滨(黑龙江店)：哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

【武汉江诗丹顿维修点/Vacheron-Constantin(中国)售后维修中心】

　　手表用什么油清洗保养?手表，无论机械表还是石英表(纯液晶显示的除外)都靠齿轮运作，我们看到手表上会标明多少钻的手表，这个多少钻并不是说手表有多少钻石，而是说明手表有多少个齿轮轴是用钻眼的，一般都用人造钻石代替。由于人造钻石耐磨损，所以表的钻眼越多，手表相对走时寿命长一点。但是手表的齿轮不可能用钻石这样硬的物料来加工，它只能用钢料来作为轮轴。手表越小越薄，轮轴则越细。

　　每天几万转的转数完全靠在钻眼里面微量的油来降低磨损，一旦油干了，轮轴处于干磨损，几年下来，这个表的寿命也就到了。尽管名表的表油都是非常高档的，但是由于量太小，几年下来肯定会挥发完，一根像头发一样细的轮轴能磨损多长时间?以前的表结构没有现在的复杂，且做的比较大，轮轴也比较粗，所以有的顾客说我的表十年没有保养也在走，现在的表越做越小，价格比以前贵几十倍，不能抱不如以前的感慨。对于手表的保养，务必要提上日程。而手表的洗油，显然是所有保养中的步。

watch what oil cleaning? Watch, whether mechanical or quartz table (except pure liquid crystal display) are on the gear operation, we see how many watches will be marked on the drill watch, this is not to say how much the drill watch how many diamonds, but that the number of watch gear shaft is drilled. Generally used instead of artificial diamond. Because of man-made diamond wear resistance, so the more the diamond eye, watch the relative travel time is a little longer. But it is impossible to use a hard material such as a diamond to process a watch. It can only be used as a wheel axle. Watch the smaller the thinner, the more detailed the wheel shaft.

every day tens of thousands of revolutions in turn relies entirely on drilling trace inside oil to reduce wear, once the oil is dry, dry in the wheel wear, a few years later, this is also the life table. Although the watch table oil are very high-end, but because the amount is too small, will finish down a few years, a fine hair like the wheel can wear long? Table structure in the past now ａnd do not complex, relatively large, the axle is relatively thick, so some of my customers say table ten years without maintenance on the table, now get smaller, the price several times more expensive than before, can＇t hold the feeling as before. For the maintenance of watches, be sure to put on the agenda. And watch the wash oil, obviously is the first step in the maintenance of all.

　　清洗剂的选择至关重要

　　在这里，首先想和大家讲讲机芯清洗剂的问题。清洗的目的就是要利用清洗剂的作用，把零件表面的油污和小污物清洗掉，因为这些油污和小颗粒物会影响机芯的走时精度和零件表面的腐蚀。清洗看似简单，但却非常重要，可以这么说，很多回修的表中有很大一部分就是清洗不干净引起的，所以清洗对于维修装配是非常重要的，一句话，洗不干净等于白白保养，还有可能对机芯造成不必要的损害。清洗剂的选用很重要，见过用普通汽油的(93号、97号)，溶剂汽油的(120号、180号)，还有用煤油的，用火机油的。下面小编讲讲维修工作中比较常见的几种清洗剂(厂家大批清洗另有清洗配方和工序)。

　　1、烃类溶剂清洗液

　　比较有代表的就是汽油(这里说的汽油是120号、180号溶剂油)和石油醚了，优点是去油污的能力很强，很快就能溶解油污，再配上小刷子，可以洗的比较干净，但是只适用于相对较新的机芯。若配合一些活性剂可以使清洗的效果更好。这类清洗剂也有缺点，首先就是易燃，非常易燃，使用中要特别注意火灾的问题。我认识的一个同行，就是使用不当导致石油醚燃烧，差点把店铺烧掉。其次，对于一些指纹氧化层效果不好。

　　2、含氯溶剂类清洗液

　　常见的有三氯乙烯、四氯乙烯、四氯化碳。清洗效果很好，溶解油污的效果也是非常好，这类溶剂沸点低，不易燃，挥发快，比汽油类快非常多，可以说把零件夹出来几秒就干了。但是这类溶剂都含有一定毒性，长时间接触对身体不好，不建议长期使用。

　　3、含氟类溶剂清洗液

　　三氟三氯乙烷，对油污渗透力、溶解力都很强，特点是不燃烧，沸点47℃，以前的资料说这类是无毒的，但近年的研究资料证明还是有一定的毒性，而且对大气层的破坏也很严重，所以这类清洗剂已经被淘汰，市面上也基本上买不到了。

　　4、用酒精、汽油、氨水、油酸等按一定比例混合而成

　　清洗的效果不错，特别是手汗这类污物和机芯的氧化，洗过之后机芯比较亮，镀金的零件也会恢复原来的色泽。缺点是比例控制要求严格，配方的腐蚀性也比较强，气味也十分的刺鼻，要注意个人的安全防护，不适合小表店的手洗流程。

　　5、进口的成品洗表水

　　要配合自动或半自动洗表机使用，都是含有一定毒性的，同样不适合手洗。

　　6、进口的1∶9浓缩液

　　这是一种红色碱性的溶液，气味十分刺激，我闻过，千万不要沾到皮肤上或眼睛里。气味我感觉是氨水的某种混合物(和4类似)，这个溶液要按比例(1份浓缩液∶9份蒸馏水)稀释在蒸馏水里，这个有温度和时间的限制，不能加温，时间也不能久，否则会对机芯有较大的腐蚀。不能手洗，只能机洗，而且用这个洗过，还要用蒸馏水再把零件洗几遍，*后要用乙醇脱水，烘干。

The choice of

cleaning agent is very important

here, first of all, ａnd we would like to talk about the movement of cleaning agents. The purpose of cleaning is to use the role of the cleaning agent, the parts tableThe oil ａnd small particles will affect the precision of the movement ａnd the corrosion of the surface of the parts. Clean lookIt is simple, but very important, it can be said that a lot of reparation in the table is a large part of the cleaning is not clean, so cleaningFor the maintenance of assembly is very important, a word, do not wash clean equal to the maintenance, ａnd may cause unnecessary damage to the core. clearLotion is very important to choose, seen with ordinary gasoline (93, 97), solvent gasoline (120, 180), as well as with kerosene, withFire engine oil. The following small series about maintenance work in the more common several cleaning agents (manufacturers a large number of cleaning ａnd other cleaning formulations ａnd processes).

1, hydrocarbon solvent cleaning solution

is more representative of the gasoline (here said the gasoline is 120, No. 180 solvent oil) ａnd petroleum ether, the advantage is the ability to oilVery strong, will soon be able to dissolve the oil, ａnd then with a small brush, you can wash the relatively clean, but only for the relatively new movement. If fitSome active agents can make the cleaning effect better. This kind of cleaning agent also has shortcomings, the first is flammable, very flammable, the use of special noteThe problem of meaning fire. I know a peer, is the use of improper lead to the burning of petroleum ether, almost burned the shop. Second, for someFingerprint oxide effect is not good.

2, solvent cleaning liquid chlorine

There are four common

trichloroethylene, vinyl chloride, carbon tetrachloride. Cleaning effect is very good, the effect of dissolved oil is also very good, this type of solutionThe agent of low boiling point, non flammable, volatile fast, faster than the gasoline is very much, can be said to the parts out of a few seconds to dry. But these solvents areHave a certain toxicity, long-term contact with the body is not good, do not recommend long-term use.

3, fluorine containing solvent cleaning solution

three fluorine three chlorine ethane, the oil pollution penetration, the solution strength is very strong, the characteristic is does not burn, the boiling point 47In recent years, the research data show that there is a certain toxicity, ａnd the destruction of the atmosphere is also very serious, so this kind of cleaning agent has beenAfter being eliminated, the market also basically can not buy.

4, with alcohol, gasoline, ammonia, oleic acid, according to a certain proportion of a mixture of

cleaning effect is good, especially in the hands of the dirt ａnd the movement of the oxidation of the movement, after washing the movement is relatively bright, gold plated parts will also be restored.Restored colour. The disadvantage is that the proportion of control requirements, the formula of the corrosive is also strong, the smell is very pungent, should pay attention to the individualSafety protection, is not suitable for small table shop hand washing process.

5, {brand name} imported finished washing water

to cooperate with automatic or semi-automatic washing machine use, are containing a certain toxicity, the same is not suitable for hand washing.

6, {brand name} imported 1: 9 concentrated liquid

this is a red alkaline solution, the smell is very exciting, I smelled, do not stick to the skin or eyes. I feel the smellIs a mixture of ammonia (and 4 similar), the solution to the proportion (1 copies of concentrated liquid: 9 parts of distilled water) diluted in distilled water, the temperatureDegree ａnd time constraints, can not be heated, the time can not be long, otherwise there will be a large movement of the corrosion. You can＇t wash, wash only, but alsoWith this washed, but also with distilled water ａnd then wash parts a few times, ａnd finally to use ethanol dehydration, drying.