积家手表售后网点【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳名表维修连锁电话：400-875-1181/400-677-0155全国百家连锁维修领导品牌，积家手表售后网点【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 服务地区：北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区，形成了庞大的腕表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务，积家手表售后网点【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠，积家手表售后网点【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 到店修表立等可取，流程透明，价格公开。

---

---

　　华东地区维修服务热线：4006807911

　　济南(山东店)：济南市历下区泉城路180号齐鲁大厦B座10层1005室

　　南京(江苏店)：南京市秦淮区汉中路1号南京金融中心10楼H室

　　合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

　　杭州(杭州店)：杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

　　上海(上海店)：上海市黄浦区南京东路409-459号上海置地广场9楼918室

　　厦门(福建店)：厦门市思明区鹭江道8号厦门银行大厦24层C单元

　　华南地区维修服务热线：4008092655

　　广州(广州店)：广州市天河区体育西路103号维多利广场写字楼A座2605室

　　深圳(深圳店)：深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

　　南宁(广西店)：南宁市青秀区金湖北路59号地王大厦12楼

　　华中地区维修服务热线：4006807911

　　武汉(湖北店)：武汉市汉江区中山大道818号平安大厦22层11室

　　郑州(河南店)：郑州市金水区花园路39号国贸中心招银大厦14层1406室

　　南昌(江西店)：南昌市东湖区胜利路步行街32号裕泰福珠宝二层

　　华北地区维修服务热线：4008092655

　　北京(北京店)：北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

　　天津(天津店)：天津市和平区南京路219号天津中心写字楼9楼903室

　　太原(山西店)：山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

　　西南地区维修服务热线：4008751181

　　成都(四川店)：成都市锦江区东御街18号天府广场百扬大厦21层2107室

　　东北地区维修服务热线：4006770155

　　沈阳(辽宁店)：沈阳市和平区中华路69-1号富丽华商务中心9楼903室

　　哈尔滨(黑龙江店)：哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

【积家手表售后网点【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳】

　　入手一枚精致腕表令你爱不释手的同时别忘记时刻提防生活中处处存在的会令它受伤甚至毁灭的 “因子”。对照一下以下六种毁表大法，看看你中招了吗?

　　一、手表没有远离包包或腰带的磁铁搭扣

　　不管机械手表还是石英手表，都是怕磁场的。对机械手表来说，因为大部分机芯组件都是钢制的，容易受到磁场的干扰。假如手表靠近强磁场附近，机芯的游丝会被磁化，从而影响走时快慢。而石英手表怕磁场，是因为石英机芯内部有步进马达，受强磁场影响后，转子会停止在某个固定位置，从而反应出秒针停走。

with a delicate watch that you love ａnd don＇t forget to watch the injured will make it even destroy "factor exists everywhere in life". Compare the following six destroyed table Dafa, see you caught

?

, a watch is not far away from the bag or belt buckle

magnet

whether mechanical or quartz watches watches, are afraid of magnetic field. For mechanical watches, because most of the core components are made of steel, susceptible to magnetic field interference. If the watch is close to the strong magnetic field near the core of gossamer is magnetized thus affecting the walking speed. But if the magnetic field is quartz watch, because the internal quartz movement ａnd a stepping motor, from the magnetic field, the rotor will stop at a fixed position, so as to reflect the second stop ａnd go.

　　手表出现走时偏差是否因为受了磁呢?如果受磁较强，只需要买一个指南针，将其靠近手表，如果指南针发生偏转，就说明手表受磁了。如果手表被磁化了，须送往专业的维修点用专门仪器进行消磁。

　　二、戴防水手表洗桑拿或参加“冰桶挑战赛”

　　防水手表通常拥有大于或等于30M(即3个大气压)级别的防水性能，但即便是普通的潜水表，也只是指在常温情况下的防水能力。

　　当受到大的温度变化影响，如戴去桑拿房或者受冰水冲击的情况下，会影响手表的正常使用寿命。高温时，润滑油不但迅速地扩散流失，还会氧化变质，因而失去润滑作用;骤然的温度变化，如突然的冰水刺激，表内的空气便容易发生冷凝，起雾气，同时手表的防水胶圈在热胀冷缩的作用下也容易加速老化，影响手表防水性能。

　　三、手表从不去专业维修点保养

　　机械手表和汽车一样，使用一定时间后都需要进行专业保养，才能确保机械配件之间的润滑及传动顺畅。一般性机械手表，每隔3-5年要送往专业的名表维修点进行洗油、换防水胶圈等系列养护。如果是潜水表，则建议每隔2年保养一次。个别品牌和技术可以延长手表的保养期，例如，的密封技术、的同轴技术可保证很长时间运转正常，因此和同轴的7-8年保养一次即可。

　　四、误以为蓝宝石表镜永不磨损

　　手表上的蓝宝石水晶镜面并非天然的蓝宝石制成，而是由精细的氧化铝粉末为原料，在一定的摄氏高温的炉内结成蓝宝石晶体块，再经过无数工序才制成手表上纯净无比的蓝宝石水晶镜面，具有抗磨损与防蚀效果。蓝宝石水晶镜面的硬度可达莫氏9级仅次于钻石，相当于钢的七倍。蓝宝石水晶镜面硬度如此之高并不表示它永不磨损，而是不易磨损。佩戴过程中应特别注意钻石、磨石、砂纸、指甲挫、花岗石面、混凝土墙面等，以免刮花其表面。尤其在验证其硬度时，不建议用破坏性行为(如摩擦地面、划玻璃等)来证实表镜的抗磨性能。

　　五、手表闲置时没有坚持上发条或取出电池

　　对于长期不使用的机械手表，应在清洗加油后收藏起来，为防止内部机油干涸，闲置时还应每个月上发条1-2次，使手表保持良好的运转。

　　对于长期不使用的石英手表(所谓长期就是超出了电池的有效期)，建议将手表送到专业维修点，把电池取出来。这是因为石英手表用的基本都是氧化银电池，即便在不使用的状态下(比如储存状态)也会自放电，温度越高自放电率就越大。电池没电以后，容易出现爬碱和漏液的问题，这个现象和普通的干电池很相似。漏液有很强的腐蚀性，就会对石英手表的线路板产生极大的伤害。

　　六、不常清洗手表外观件导致被汗渍腐蚀

　　手表*常用的材质为不锈钢，其主要成份为镍与铬，而镍、铬等元素易受强酸强碱侵蚀。人体排出的汗液中含有盐酸的成分，佩戴手表时，若经常被汗水接触或任由酸碱盐污物积聚而不及时清理，表带、表壳等处就会慢慢出现被腐蚀的痕迹。简单的处理办法是将用软毛牙刷蘸清洗剂轻轻刷洗后用软布擦干，但为了保险起见，建议到专业维修点用超声波仪器进行清洗。

watch appears to travel when the deviation is because of the magnetic it? If you are a strong magnetic, only need to buy a compass, close to the watch, if the compass deflection, it shows the watch by the magnetic. If the watch is magnetized, shall be sent to the professional repair of degaussing with special instruments.

two, a waterproof watch the sauna or participate in ice bucket challenge

waterproof watches usually have greater than or equal to 30M (that is, 3 levels of air pressure) level of waterproof performance, but even the ordinary diving table, but also refers to the water at room temperature, the ability to.

when subjected to large temperature changes, such as wearing a sauna or the impact of ice water, will affect the normal life of the watch. High temperature lubricating oil, not only quickly spread loss, will be oxidized, thus losing lubrication; sudden temperature changes, such as a sudden ice water stimulation, the air inside the table will be prone to condensation, fog over at the same time, waterproof apron watches in thermal expansion ａnd contraction of the role is also easy to accelerate the aging effect of waterproof watch.

three, watches never go to professional maintenance point maintenance

mechanical watches ａnd cars, the use of a certain period of time after the need for professional maintenance, in order to ensure that the lubrication between machinery parts ａnd smooth transmission. The general mechanical watches, every 3-5 years to watch professional maintenance point oil, waterproof apron series for maintenance. If it is a diving table, it is recommended to maintain once every 2 years. Individual brand ａnd technology watch can prolong the maintenance period, for example, the word brand sealing technology, the word brand coaxial technology can guarantee the long time operation, so the brand brand word word 7-8} ａnd {coaxial maintenance once a year.

four, mistakenly thought that the sapphire table mirror never wear

Made of

watch on sapphire crystal mirror is not natural sapphire, but by the fine alumina powder as raw materials, in certain degrees centigrade temperature of furnace forming sapphire crystal, after countless procedure to watch made of pure sapphirine crystal, with anti abrasion ａnd anti erosion effect. The hardness of sapphire crystal mirror Morse 9 only diamonds, equivalent to seven times of steel. Sapphire crystal mirror surface hardness is so high does not mean that it will never wear, but not easy to wear. Special attention should be paid to the diamond, stone, sand, nail file, granite surface, concrete walls ａnd the wear process, in order to avoid scratching the surface. Especially in the verification of its hardness, it is not recommended to use destructive behavior (such as friction surface, glass, etc.) to confirm the performance of the table mirror.

five, when the watch is idle, do not adhere to the spring or remove the battery

for a long time without the use of mechanical watches, should be cleaned after the collection up, in order to prevent the internal oil dry, idle should also be a spring 1-2 times each month, so that the watch to keep good operation.

for a long time does not use the quartz watch (the so-called long term is beyond the validity of the battery), it is recommended to watch the professional repair point, the battery out. This is because the quartz watches are basically using silver oxide battery is not in use, even if the condition (such as storage) will self discharge, the higher the temperature self discharge rate is greater. After the battery is no electricity, prone to the problem of alkali ａnd leakage, this phenomenon is very similar to ordinary dry batteries. The leakage liquid has the very strong corrosion, will have the huge harm to the quartz watch＇s circuit board.

six, do not wash often watch appearance parts caused by sweat corrosion

The most commonly used material for stainless steel

watch, which consists primarily of nickel ａnd chromium, nickel, chromium ａnd other elements susceptible to acid alkali corrosion. The human body discharges sweat contains hydrochloric acid composition, wearing a watch, if often sweat contact or allow the alkali salt buildup dirt ａnd not timely cleaning, watchband etc will slowly appear to be signs of corrosion. A simple approach is to use a soft toothbrush dipped in detergent scrub gently with a soft cloth, but for the sake of insurance, it is recommended to professional maintenance of ultrasonic cleaning equipment.