您的位置:易推广 > 仪器仪表 > 流量仪表 > 水表 > 精时恒达钟表有限公司 > 产品展示 > 手表维修 > 积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳

产品展示

积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳

点击次数:19发布时间:2017/2/28 21:29:06

积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳

更新日期:2017/2/28 21:29:06

所 在 地:中国大陆

产品型号:

简单介绍:欢迎光临名表维修服务中心,瑞士名表专业维修点,专业手表故障维修,清洗保养,名表鉴定,更换配件。若您有手表故障保养等方面的问题,可随时拨打我们的热线电话:,我们将24小时竭诚为您服务,谢谢!

优质供应

详细内容

积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳名表维修连锁电话400-875-1181/400-677-0155全国百家连锁维修领导品牌,积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 服务地区:北京、上海、天津、广州、深圳、杭州、南京、沈阳、太原、成都、武汉、南昌、西安、南宁、郑州、昆明、苏州 等地区,形成了庞大的腕表售后维修服务网络,为广大消费者提供方便、快捷的手表维修服务,积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 专业的维修技术、透明 的维修价格、立等可取的维修效率网上电话预约可享受9折优惠,积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳 到店修表立等可取,流程透明,价格公开。


全国统一图片


  华东地区维修服务热线4006807911

  济南(山东店):济南市历下区泉城路180号齐鲁大厦B座10层1005室

  南京(江苏店):南京市秦淮区汉中路1号南京金融中心10楼H室

  合肥(安徽店): 合肥市蜀山区长江西路189号合肥之心城环球中心A座20层09室

  杭州(杭州店):杭州市下城区环城北路208号杭州大厦C座坤和中心30层06室

  上海(上海店):上海市黄浦区南京东路409-459号上海置地广场9楼918室

  厦门(福建店):厦门市思明区鹭江道8号厦门银行大厦24层C单元

  华南地区维修服务热线4008092655

  广州(广州店):广州市天河区体育西路103号维多利广场写字楼A座2605室

  深圳(深圳店):深圳市罗湖区深南东路5002号地王大厦写字楼25层2510室

  南宁(广西店):南宁市青秀区金湖北路59号地王大厦12楼

  华中地区维修服务热线4006807911

  武汉(湖北店):武汉市汉江区中山大道818号平安大厦22层11室

  郑州(河南店):郑州市金水区花园路39号国贸中心招银大厦14层1406室

  南昌(江西店):南昌市东湖区胜利路步行街32号裕泰福珠宝二层

  华北地区维修服务热线4008092655

  北京(北京店):北京市西城区西单北大街甲131号西单大悦城写字楼7楼702室

  天津(天津店):天津市和平区南京路219号天津中心写字楼9楼903室

  太原(山西店):山西省太原市迎泽区解放路3号亨得利钟表眼镜店三层

  西南地区维修服务热线4008751181

  成都(四川店):成都市锦江区东御街18号天府广场百扬大厦21层2107室

  东北地区维修服务热线4006770155

  沈阳(辽宁店):沈阳市和平区中华路69-1号富丽华商务中心9楼903室

  哈尔滨(黑龙江店):哈尔滨市南岗区东大直街146号上和置地广场金座12楼1214室

全国店图片

【积家表维修【中国区售后维修(JAEGER-LECOULTRE)】北京上海广州深圳】

  防水性能:

  表底刻有"WATER RESISTANT"者具有防水性能,能承受30米的水深压力,请定期检查以确保性能。无论何种原因造成手表入水时,请送往经销店检修,以免日久产生侵蚀或短路(石英表)而致机件的损坏。

  自行保养须知:

  1、平日自行保养时,以柔软的绒布轻拭为佳,金属带可用淡肥皂水清洁,皮带则不宜浸湿。

  2、保持表体干燥,不宜与腐蚀性的物品接触。

  3、不宜置于磁场热源附近,以免造成机芯零件磁化或受热变形,致使运作失常。

  4、定期到经销店接受检查维修及服务。

  自动机械表:

  自动机械表在配带时,其自动装置因获得动能而自动上链,使自动机械表正常运转,如手表除下后也有一段时间的运转功能。请注意因转过少或除下后而停止运转时,可用手上链。

  石英表:

  石英表从电池获得电能而正常运转。每只售出的石英表均已附有原装电池,当电池越近耗尽时,秒针便每隔四下才跳动一次。如有此情况出现,应尽快更换电池,否则可能对机件造成损坏。

  时间及日期调校:

  1、机械表的正常位置(匙把完全按入),在此位置也可以手动上链,向上(顺时针方向)转动即可上链。

  2、将匙把轻拔至段,调校日历和星期。调校日历--向上(顺时针方向转动即可;调校星期-- 向下(逆时针方向)转动即可。

  3、将匙把轻拔至第二段,即可调校时间,如调校逾24小时,则日历及星期也跳越一天。

  4、石英表调校的操作请参照本项第2、3条。

  保证:

  每只表在投入市场之前,均已按严格的品质检验程序检验。为对可能存在的制造缺陷负责和让顾客安心,我们为您特别提供由购买日起一年内有效的"国 际保证",其保证范围只限表内机芯零件,并不包括外壳(如:表壳、表带、表面、玻璃及匙把)、电池、遗失、因自行拆修或戴用不当而引起的一切人为损坏。

  waterproof performance:

  {brand name} at the bottom of the table with the "RESISTANT WATER" who has a waterproof performance, can withstand 30 meters of water depth pressure, please check regularly to ensure that the performance. Regardless of the causes of the watch into water, please sent to the dealership to repair, so as to avoid falling from erosion or short (quartz) caused by mechanical damage.

  self care tips:

  1 on weekdays and self maintenance, with a soft cloth to gently wipe the better, metal belt available light soap water cleaning, the belt is not wet.

  2, keep the body dry, not with corrosive goods contact.

  3, should not be placed near the magnetic heat source, so as not to cause the movement of the magnetic or thermal deformation of the parts, resulting in the operation of the disorder.

  4, regularly to the brand name of the store to accept the inspection and maintenance services.

  automatic mechanical watch:

  automatic mechanical watch in the belt, the automatic device for obtaining kinetic energy and automatically on the chain, so that the normal operation of automatic machinery, such as watches in addition to a period of time after the operation. Please note that due to too little or in addition to the next stop after the operation, the chain can be used.

  quartz watch:

  quartz watch from the battery to obtain electric energy and normal operation. Each sold quartz watch have attached the original battery, when the battery is nearly exhausted, then every four seconds to beat again. If this occurs, the battery should be replaced as soon as possible, otherwise it may cause damage to parts.

  time and date:

  1, the normal position of the mechanical table (the key to the full press), in this position can also be manually on the chain, upward (clockwise) rotation can be on the chain.

  2, will be the key to pull the light to the first paragraph, adjust the calendar and the calendar week. Adjust the calendar - up (clockwise rotation can be; adjust the week - down (counterclockwise) rotation can be.

  3, the key will be to pull light to paragraph second, you can adjust the time, such as the adjustment of more than 24 hours, and the calendar week skip a day.

  4, quartz watch adjustment of the operation please refer to this item second, 3.

  international guarantee:

  each {brand} table in the input market, have been strict quality inspection procedures. As for manufacturing defects may exist for and let customers peace of mind, we are your special offer by the date of purchase within one year of the "international guarantee", the guarantee range only table in the machine parts, not including the shell (such as: watchcase, watchband, surface, glass and spoon), all man-made damage to the battery, lost, due to dismantle wear caused by improper repair or.

联系我们

联系人:刘技师

点击查看联系方式

企业档案

  • 会员类型:免费会员
  • 工商认证: 【已认证】
  • 最后认证时间:
  • 法人:
  • 注册号:
  • 企业类型:生产商
  • 注册资金:人民币万

script>
在线咨询

提交