NAJS automatic flash speed multi-station transformer calibration device

产品别名

NAJS全自动极速多台位互感器检定装置，极速多台位互感器检定装置，全自动多台位互感器检定，多台位互感器测试仪，全自动极速多台位互感器校验装置

产品概述
NAJS全自动极速多台位互感器检定装置，是南澳电气公司为适应现代互感器校验的快速、准确的特点而开发的新一代互感器检定装置。该装置由NAJS全自动极速多台位互感器检定装置、电流负载箱、控制柜、电流互感器专用测试台等几个部分组成。在保持原技术特点的前提下，在电流互感器的快速测量、测试点的快速定位、以及负荷箱、各种变比的互感器覆盖等方面有了非常大的提高。
产品特点
 (1) 该装置细调节采用了程控源技术，使测试点的定位更加快速、准确。
 (2) 该装置在多只电流互感器测量速度方面有了质的提高，在3-5分钟的时间里可测量十二只任何变比的电流互感器。
 (3) 该装置配置了5A的标准电流互感器，电流负荷箱配置了5A负载值2.5VA-60VA，电压负载箱 配置了100V负载值从1.25VA-158.75VA基本上可满足用户的要求。负载箱在测量时可进行自动切换。
 (4) 该装置可进行互感器的规程和非规程的测量，测量时用户可指定对任何百分点的测量。
技术指标
(1) 环境条件
温度：5℃~40℃    
相对湿度：<80%（25℃） 
海拨高度：<2500m
电源频率：50Hz±0.5Hz  
电源电压：220V±5V

(2) 测量范围：
 f：0.0000%～200.0%     δ：0.000′～999.9′

Ｒ：0.0000Ω～60.0Ω     X：0.0000Ω～60.0Ω      G：0.0000mS～60.0mS

测量对象：CT、PT、阻抗、导纳。
(3) 基本误差：
同相分量：ΔX=±（X×2%+Y×2%±2个字）
正交分量：ΔY=±（Y×2%+±X×2%×34.38）±5个字
“X”、“Y”——仪器的显示值
“5个字”——仪器的量化误差
百分表：1级           
(4)   工作范围：
电流：（1%-149%）In  （In=5A）
      （5%-149%）In  （In=1A）
工作负荷： 电流： To对Tx<0.12W cosφ=1.0

外形尺寸（mm）
横台体：1500（L)×780(W)×1030(H)  

竖台体：670（L)×630(W)×1570(H)

Product Description

NAJS automatic flash speed multi-position transformer calibration device, is the South Australian Electric Company to adapt to the modern transformer calibration fast ａnd accurate characteristics of the development of a new generation of transformer calibration device. The device consists of NAJS automatic flash speed multi-position transformer calibration device, the current load box, control cabinet, current transformer test stand ａnd other components. In the premise of maintaining the original technical characteristics of the current transformer in the rapid measurement of the rapid positioning of test points, ａnd the load box, a variety of variable ratio of the transformer cover, etc. have been greatly improved.

Product Features

(1) The fine adjustment of the device uses a programmable source technology, the test point of the positioning more quickly ａnd accurately.

(2) the device in a number of current transformer measurement speed has been a qualitative improvement in the 3-5 minutes of time can be measured in any of the twelve transformers than any current transformer.

(3) The device is equipped with 5A standard current transformer, the current load box configuration 5A load value of 2.5VA-60VA, the voltage load box configuration 100V load value from 1.25VA-158.75VA basically meet the requirements of users. The load box can be switched automatically during measurement.

(4) The device can be used for the regulation of the transformer ａnd non-regulation of the measurement, the user can specify the measurement of any percentage of the measurement.

Technical indicators

(1) environmental conditions

Temperature: 5 ° C to 40 ° C

Relative humidity: <80% (25 ℃)

Altitude: <2500m

Power frequency: 50Hz ± 0.5Hz

Power supply voltage: 220V ± 5V

(2) Measuring range:

F: 0.0000% to 200.0% δ: 0.000 ＇to 999.9＇

R: 0.0000? To 60.0? X: 0.0000? To 60.0? G: 0.0000 mS to 60.0 mS

Measurement objects: CT, PT, impedance, admittance.

(3) the basic error:

In-phase component: ΔX = ± (X × 2% + Y × 2% ± 2 words)

Quadrature component: ΔY = ± (Y × 2% + ± X × 2% × 34.38) ± 5 words

"X", "Y" - the displayed value of the instrument

"5 words" - quantization error of the instrument

Dial indicator: Level 1

(4) Scope of work:

Current: (1% -149%) In (In = 5A)

(5% -149%) In (In = 1A)

Workload: Current: To for Tx <0.12? Cos? = 1.0

(5) Dimensions (mm)

Horizontal table body: 1500 (L) × 780 (W) × 1030 (H)

Vertical platform body: 670 (L) × 630 (W) × 1570 (H)