产品展示
优质供应
详细内容
Blue M Standard Batch Oven
Blue M 工业烘炉
Features:
Welded construction contributes to Blue M’s legendary strength & reliability.
Fiberglass Insulation - 4 full inches minimizes heat loss.
Baked on powder-coated enamel finish for long-lasting corrosion protection.
Double-wall, insulated doors with Blue M silicone rubber seal with double doors on 48-inchlarger models.
Side-mounted control compartment for easier control access (60, 75, 8096 cu. ft. models only).
Adjustable exhaust system offers rapid cool down or operation close to ambient.
Wiring - completeenclosed to meet N.E. code, as amended.
设备特点：
满焊结构缔造出Blue M优质的可靠性和强大的实力；
4英寸玻璃纤维绝缘层可限度的减少热量散失；
表面喷塑处理保证了设备长时间的抗腐蚀能力;
双层绝缘层大门带Blue M硅橡胶密封，48英寸及更大型号设计为双扉；
侧面操作间使控制更容易实现（仅限于60, 75, 80 和 96立方英尺的型号）；
可调整的排气系统使制冷速度或接近环境温度运行速度更快；
配线－完全遵循N.E.代码执行。
Temperature Control
Available with profiling or single set-point controls
Horizontal air flow assures uniform thermal performance under all loading conditions.
EXCLUSIVE BLUE M Eterna heating elements with low waft density for longer service life,cylinder type to assure years of reliable service.
Blue M one-pass air flow controls your profile, including cool down, infinitely variable control from full re-circulation to full one pass,optional motorized damper for automatic operation.
Direct drive blower - designed especially for these models, with no bearings, pulleys or belts, motor overload protection, multi-blade centrifugal blower, high-volume air deliverydynamically balanced for minimum noisemaximum reliability.
温度控制：
可实现温度程序控制和定值控制;
水平送风设计能保证所有负载状况下温度的均匀度；
独有的Blue M Eterna加热原理具有低功率设计可有效的延长使用寿命，汽缸形设计可保证长年服务的可靠性；
独创的Blue M单一通道气流设计可控制你的测试，包括制冷，无限变量控制可使再循环气流进入到单一完全通道以及用于自动操作的可选机动闸；
直接驱动风机－是专为该系列产品设计的，无轴承、滑轮或皮带，具有电机过载保护功能，多叶离心风机，高容量空气传输和动力平稳原理以保证*小噪音及可靠性。
General Specifications
Temperature range: 15°C above ambient to 316°C (600°F)
Extended range: Available to 399°C (750°F)
Uniformity: +1.5% of set point (up to 36 cu. ft.); ± 2% of set point (larger than 36 cu. feet)
Control Accuracy: +0.5°C
Resolution: +0.1°C
Performance data (typical): Run-up to 300°C 45 min. (60 cu. feet or less); or 60 min (larger than 60 cu. ft.)
- Empty chamber performance with exhaust closedat rated voltage -
主要技术参数：
温度范围：室温+15°C～316°C (600°F)
温度扩展范围：可达到399°C (750°F)
温度均匀度：+1.5％（36立方英尺以下）；± 2%（36立方英尺以上）
控制精度：+/- 0.5°C
分辨率：+/- 0.1°C
性能数据（典型）：升温至300°C耗时45min（小于或等于60立方英尺）；升温至300°C耗时60min（大于60立方英尺）
－额定电压下关闭排气装置空载运行－
Standard Batch Oven Options
Stainless or CRS steel slotted shelves
High-temperature capability of 750°F
High-power for fast heat-up, high exhaust or large loads
Door switch
Motorized intake damper
Weldedsealed inner chamber
24-hour, 7-day program timer
Circular chart recorder
Reverse door hinge
Backup over-temperature protection
标准烘炉可选功能：
不锈钢或镀锌板开槽托架；
高温可达750°F；
大功率可实现快速加热、排气或处理超大的负载；
大门开关；
机动进气阀；
焊接密封内胆；
7天24小时数字式过程时间器；
圆形图纸记录仪；
反向门铰链；
备用超温保护。
Engineered Oven Options
Additional lead-in ports
Interior light
Glass observation panel (s)
Oversized one-pass airflow system for faster cool down
Redundant over-temperature protection
Rear access door (s)
Comm-Link RS-485 to RS-232 converter
All stainless steel construction
Special control systems
Five-drawerfive-door configurations for process
flexibility
烘炉电器可选功能：
备用通入管道；
内置照明灯；
玻璃观察面板；
大型单一通道气流系统用于快速制冷；
双重超温保护；
背面检修门；
Comm-Link RS-485到 RS-232转换器；
全不锈钢结构；
定制的控制系统；
5抽屉5个门结构可实现灵活操作。
Roll-In-Rack Options
Cold-rolled or stainless steel roll-in-racks
Roll-in-rack shelves
Special truck channel or flat un-insulated floor for
customer designed racks
Custom designed roll-in-racks for product fixturing
Pass-through “tunnel” design with frontrear doors
转入搁架可选功能：
冷轧钢或不锈钢搁架；
转入搁架的托架；
与定制搁架配套的专有卡车通道或平坦的非隔热地板；
与产品夹具配套的定制搁架；
带前后门通道设计。
