介电常数测试仪介质损耗测试仪：GDAT-A

介电常数介质损耗试验仪满足标准：GBT 1409-2006测量电气绝缘材料在工频、音频、高频（包括米波波长在内）下电容率和介质损耗因数的推荐方法

介质损耗和介电常数是各种电瓷、装置瓷、电容器等陶瓷，还有复合材料等的一项重要的物理性质，通过测定介质损耗角正切tanδ及介电常数（ε），可进一步了解影响介质损耗和介电常数的各种因素，为提高材料的性能提供依据；仪器的基本原理是采用高频谐振法，并提供了，通用、多用途、多量程的阻抗测试。它以单片计算机作为仪器的控制，测量核心采用了频率数字锁定，标准频率测试点自动设定，谐振点自动搜索，Q值量程自动转换，数值显示等新技术，改进了调谐回路，使得调谐测试回路的残余电感减至，并保留了原Q表中自动稳幅等技术，使得新仪器在使用时更为方便，测量值更为精确。仪器能在较高的测试频率条件下，测量高频电感或谐振回路的Q值，电感器的电感量和分布电容量，电容器的电容量和损耗角正切值，电工材料的高频介质损耗，高频回路有效并联及串联电阻，传输线的特性阻抗等。

介电常数介质损耗试验仪用于科研机关、学校、工厂等单位对无机非金属新材料性能的应用研究。

  1．Q值测量

   a．Q值测量范围：2～1023。

   b．Q值量程分档：30、100、300、1000、自动换档或手动换档。

 c．标称误差

项    目

GDAT-A

频率范围

20kHz～10MHz；

固有误差

≤5％±满度值的2％；

工作误差

≤7％±满度值的2％；

频率范围

10MHz～60MHz；

固有误差

≤6％±满度值的2％；

工作误差

≤8％±满度值的2％。

   2．电感测量范围：14.5nH~8.14H

 

 

 

 

3．介电常数介质损耗试验仪电容测量：1~ 460

项    目

GDAT-A

直接测量范围

1～460pF

主电容调节范围

准确度

30～500pF

150pF以下±1.5pF；

150pF以上±1％

   注：大于直接测量范围的电容测量见使用规则

   4．介电常数介质损耗试验仪信号源频率覆盖范围

项     目

GDAT-A

频率范围

10kHz～50MHz

频率分段

（虚拟）

10～99.9999kHz

100～999.999kHz

1～9.99999MHz

10～60MHz     

频率指示误差

3×10-5±1个字

   5．Q合格指示预置功能

      预置范围：5～1000。

   6．Q表正常工作条件

   a. 环境温度：0℃～+40℃；                     

b．相对湿度：<80％；  

c．电源：220V±22V，50Hz±2.5Hz。

   7．其他

   a．消耗功率：约25W；  

b．净重：约7kg；  

c. 外型尺寸：（l×b×h）mm：380×132×280。

   8．产品配置：

a.测试主机一台；

b.电感9只；

c.夹具一套   

电感：

 

线圈号    测试频率    Q值    分布电容p       电感值  

  9         100KHz      98       9.4           25mH

  8         400KHz     138       11.4        4.87mH

  7         400KHz    202       16           0.99mH

  6           1MHz     196       13          252μH

  5           2MHz     198       8.7        49.8μH

  4         4.5MHz    231       7             10μH 

  3          12MHz      193     6.9         2.49μH

  2          12MHz      229     6.4        0.508μH

             

  1   25MHz，50MHz   233，211    0.9       0.125μH

 

 

BDJC-0-100KV 介电击穿试验仪

 

BDJC系列绝缘材料工频率介电击穿试验仪

 

BDJC系列电压介电强度试验仪器

 

BDJC系列 电压击穿试验仪 

 

BDJC系列绝缘漆漆膜击穿强度试验仪

 

BDJC电容器纸工频电压击穿试验仪

 

EST-121 体积表面电阻率测定仪 

 

GDAT-A介质损耗测试仪/介电常数测试仪 

 

GDAT-C新型介电常数介质损耗测试仪

 

BDH 耐漏电起痕试验仪

 

BDH-B耐电弧试验仪

 

 

中国检测行业与验证服务的尖端者和智领者，帮助众多检测质检单位和学校教研单位提供一站式的全面质量解决方案。

 

注重每一个细节是北广公司对于每个客户的承诺 ， 也是北广公司一直追求的宗旨。北京北广精仪仪器设备有限公司    www.beiguangjy.com                             

 

Dielectric constant dielectric loss tester

Dielectric constant dielectric loss tester: GDAT-A

Dielectric constant dielectric loss tester to meet standards: GBT 1409-2006 measurement of electrical insulating materials at power, audio frequency, high frequency （ including meter wavelengths ） of the permittivity ａnd dielectric loss factor of the recommended method

GDAT-A

Dielectric constant dielectric loss tester details:

One, the dielectric constant dielectric loss tester overview

Dielectric loss ａnd dielectric constant are all kinds of porcelain, porcelain, ceramic capacitor device, ａnd composite materials is an important physical properties, by measuring the dielectric loss tangent of dielectric constant （ Tan δ andε）, to further understand the effects of dielectric loss ａnd dielectric constant of the various factors, in order to improve the material the property basis; instrument basic principle is the use of high frequency resonance method, ａnd provides, universal, multi-purpose, multiple range impedance test. It uses single-chip computer as the control core of measuring instrument, using the frequency locking, frequency standard test point automatic setting, resonant point automatic search, Q value range automatic conversion, numerical display ａnd other new technology, improved the tuning circuit, the tuning circuit for testing the residual inductance is reduced to the minimum, ａnd retains the original Q table in the automatic amplitude stabilizer technology, makes the new instrument in the use of more convenient, measurement is more accurate. Instrument in high frequency test conditions, measurement of high frequency inductive or resonant loop of the Q value, the inductance of the inductor is the amount ａnd distribution of capacitance, capacitance ａnd loss angle tangent value of electrical materials, dielectric loss in high frequency, high frequency circuit in parallel ａnd series resistance, the characteristic impedance of the transmission line ａnd so on.

Dielectric constant dielectric loss tester used in scientific research institutions, schools, factories ａnd other units to inorganic metalloid new material property application research.

In two, the dielectric constant dielectric loss tester technical index

1.Q measurement

A.Q measurement range: 2～ 1023.

The b.Q value range profile: 30, 100, 300, 1000, automatic or manual shift.

Nominal error C.

Item

GDAT-A

Frequency range

20kHz - 10MHz;

Intrinsic error

= 5%±full scale value 2%;

Operating error

= 7%±full scale value 2%;

Frequency range

10MHz - 60MHz;

Intrinsic error

= 6%±full scale value 2%;

Operating error

= 8%±full scale value 2%.

The 2 inductance measurement range: 14.5nH~8.14H

A 3 dielectric constant dielectric loss tester capacitance measurements: 1~ 460

Item

GDAT-A

Measuring range

1 - 460pF

The main capacitor adjustable range

Degree of accuracy

30 - 500pF

The following 150pF± 1.5pF;

150pF or + 1%

Note: larger than direct measurement range of the capacitance measurement see using rules

A 4 dielectric constant dielectric loss tester signal source frequency coverage

Item

GDAT-A

Frequency range

10kHz - 50MHz

Frequency segmentation

（ virtual ）

10 - 99.9999kHz

100 - 999.999kHz

1 - 9.99999MHz

10 - 60MHz

Frequency indication error

3 x 10-5 ±1 words

5.Q qualified instructions preset function

Preset range: 5～ 1000.

Table 6.Q the normal working conditions

A. environment temperature: 0 ℃~ +40 ℃;

Relative humidity: <80% b.;

Power supply: C. 220V± 22V, 50Hz ±2.5Hz.

7 other

A. power consumption: about 25W;

Net weight: B. about 7kg;

Size: C. （ L× B× h ）× 132 mm:380× 280.

8 product configuration:

The A. test host a;

B. inductance 9;

C. jig set

Inductance:

Coil test frequency distributions of Q values of P inductance capacitance

9 100KHz 989.4 25mH

8 400KHz 13811.4 4.87mH

7 400KHz 20216 0.99mH

6 1MHz 19613252 μ H

5 1988.7 49.8 μ H 2MHz

4 4.5MHz 231710 μ H

3 1936.9 2.49 μ H 12MHz

2 2296.4 0.508 μ H 12MHz

1 25MHz, 0.125μ H 50MHz 2332110.9

Canton company other insulating materials testing instruments:

BDJC-0-100KV dielectric breakdown testing instrument

BDJC series insulating materials at power frequencies of dielectric breakdown test instrument

BDJC series voltage dielectric strength test apparatus

BDJC series voltage breakdown testing instrument

BDJC series insulating paint film breakdown strength tester

BDJC capacitor voltage breakdown testing instrument

EST-121 volume surface resistivity measuring instrument

GDAT-A dielectric loss tester / dielectric constant test

GDAT-C model dielectric constant dielectric loss tester

BDH leakage resistance tester

BDH-B arc resistance tester

China Inspection ａnd certification services tip ａnd intellectual leader, helped many testing quality inspection units ａnd schools ａnd research units to provide comprehensive one-stop quality solutions.

Pay attention to every detail is Canton company for each customer commitment, ａnd North Canton company has been pursuing the aim of. Beijing North Canton precision instrument equipment limited www.beiguangjy.com