| MODELVERSIONMPIMAGING SENSOR | | | FFMV-03M2C-CS | | FFMV-03M2M-CS | | | 0.3 MP | · Micron MT9V022 CMOS, 1/3", 6.0 µm · Global Shutter · 752x480 at 60 FPS | Board level option available to OEM volume customers; please contact sales | A/D Converter | On chip 10-bit | | Video Data Output | 8, 16-bit digital data | | Image Data Formats | Y8, Y16 (mono), 8-bit and 16-bit raw Bayer data (color) | | Partial Image Modes | Pixel binning and region of interest (ROI) modes | | Image Processing | Gamma, lookup table, hue, saturation, and sharpness | | Gain | Automatic/Manual Gain modes | | 0 dB to 12 dB | | Gamma | 0 to 1 | | White Balance | Automatic/manual modes, programmable via software | | Color Processing | On-camera in YUV or RGB format, or on-PC in Raw format | | Digital Interface | 6-pin IEEE 1394a for camera control, video data, and power | | Transfer Rates | 400 Mb/s | | GPIO | 7-pin JST GPIO connector, 4 pins for trigger and strobe, 1 pin +3.3 V, 1 VEXT pin for external power | | External Trigger Modes | IIDC Trigger Modes 0 and 3 | | Synchronization | Via external trigger or software trigger (on same bus only), or free-running (using standard video formats/modes operating at 30 FPS and 60 FPS only) | | Shutter | Global Shutter | | Automatic/Manual/Extended Shutter modes | | 0.03 ms to 512 ms (extended shutter mode) | | Memory Channels | 3 memory channels for custom camera settings | | Flash Memory | N/A | | Dimensions | 44 x 34 x 24.4 mm (excluding lens holder and connectors) | | Mass | 37 g (without optics or tripod mounting bracket) | | Power Consumption | 8 to 30 V, 1 W at 12 V via 1394a interface | | Camera Specification | IIDC v1.31 | | Camera Control | via FlyCapture SDK, CSRs, or third party software | | Camera Updates | In-field firmware updates | | Lens Mount | CS-mount | | Temperature | Operating: 0° to 40°C; Storage: -30° to 60°C | | Emissions Compliance | CE, FCC, RoHS | | Operating System | Windows XP SP1 | | Warranty | One year | Board level option available to qualified customers. Development Kit Contents
The following items are included in the Firefly MV FireWire Development Accessory Kit DEVKIT-01-0005: · ACC-01-2002: 2 meter, 6-pin to 6-pin, ultra-thin IEEE-1394 cable · ACC-01-1000: IEEE-1394 OHCI PCI Host Adapter 3 port-400 Mbps card · ACC-01-3002: Male GPIO connector pre-wired for quick and easy access The following items are included in the Development Accessory Kit DEVKIT-01-0003: · 2 meter USB 2.0 cable (Type A to Mini-B 5-pin) · ACC-01-3002: GPIO wiring harness · Firefly MV and Chameleon Getting Started Manuals Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off or on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. RoHS / WEEE Compliance
This product is RoHS and WEEE compliant. |
